Comply with GJB599A (MIL-DTL-38999) Ⅲ series interface
Shells made of different materials and plating applicable for different environments
Five-keyway orientation with blind mating and anti-mismating function
Three-start thread quick coupling with anti-loose structure
Optical alignment using ceramic pin and ferrule to realize precise mating
Various termination option
Adaptor (hermetic type optional) without optical cable bondage
Q/21EJ841 applied enterprise standard
BOSA:
Optical Modules are electronic components that convert an electrical signal to an optical signal simultaneously. Optical Modules are categorized into LD (Laser Diode) Modules and PD (Photo Diode) Modules. Optical Transceivers are packaged PD and LD Modules. These products are the core devices for any optical communication system such as an Optical Transponder and an ONU (Optical Network Unit). We provide the components that are used in Optical Modules and Assemblies, BOSA (Bidirectional Optical Sub. Assembly) up to 10G speed rates.
WDM With LD&PD:
WDM Series are WDM Series with Coaxial Laser and Detector, use InGaAsP/InP MQW chip and InGaAs PIN, which has features as follows: low noise, low distortion, excellent isolation, high reliability, high linearity and wide communication band. The laser diode and detector are mounted into a coaxial package with single mode fiber pigtail.
Fiber Fast Connector is used for field assembled optical fiber connector ,widely used in fiber to the home (FTTH) access optical networks,to assemble with drop cable quickly.
Rontaray’s fast connector have high quality and high success install rate.
Fiber optic attenuators are devices which reduce (attenuate) the strength of a fiber optic signal within a fiber optic network. Attenuators are usually used when the signal arriving at the receiver is too strong and hence may overpower the receiving elements. Sometimes attenuators are also used for stress testing a network link by incrementally reducing the signal strength (increasing the dB attenuation) until the optical link fails, thus determining the signal’s existing safety margin.
Our singlemode attenuators offer a operating wavelength range of 1250nm to 1600nm.Three types (male-female type, fixed type, in-line type) attenuators can be supplied to our client.
Adapter is a mechanical device designed to align fiber optic connectors. It contains the interconnect sleeve that holds two ferrules together. They are used to connect optical fiber connectors of the same type, such as FC, SC, LC, ST, MU, MTRJ, D4, DIN, MPO, E2000 etc, widely used in optical fiber communications equipment, measuring appliance and so on, the performance stably reliable. OSM offer all kinds of fiber optic adapters, available in singlemode & multimode, simplex & duplex, UPC & APC…
OSM offers various kinds of fiber patch cables, like FC, SC, ST, LC, D4, DIN, MU, MPO, MTRJ, SMA, E2000 ODC,HEBM,HEBXL,IP-LC,PD-LC,Fullaxs-DLC,J599 etc, available for PC/UPC/APC versions, provides singlemode, multimode and OM3 cables, all the patch cord meet with RoHS compliance.
GYM connector is a high density optical connector,applied in digital radar and big data optical communicaltion,application electronic,aviation,aerospace,vessle etc..
Digital Transmission:
Analogue Transmission:
CWDM Lasers:
Mini-TOSAs:
Our mini-TOSA (transmission optical sub-assembly) is built on a 3.8mm CAN, designed for use in the small form factor, and small form pluggable MSA transceiver modules.
Optical Modules are electronic components that convert an electrical signal to an optical signal simultaneously. Optical Modules are categorized into LD (Laser Diode) Modules and PD (Photo Diode) Modules. Optical Transceivers are packaged PD and LD Modules. These products are the core devices for any optical communication system such as an Optical Transponder and an ONU (Optical Network Unit).
We provide the components that are used in Optical Modules and Assemblies. We have the ability to design and provide products from a trial sample basis up to a mass production level. Optical Modules are divided into two industry types. One type is known as Receptacle Modules. This type is represented by a TOSA (Transmitter Optical Sub-Assembly) and ROSA (Receiver Optical Sub-Assembly) Assemblies. The second type is known as Coaxial Modules which consists of Fiber Pigtails.
OSM offers a range of InGaAs PIN Photodiodes specifically designed for Digital data Transmission applications featuring:
Triplexer series is 1310nm/1490nm/1550nm single fiber optical device designed for digital Bi-directional and analog receiver. It is suitable to use in the digital/analog FTTx application. Integrated with two kind of coupler, the first is 1310nm/1490nm splitter and the second is 1490nm/1550nm filter.
The transmitter section incorporates an advanced FP/DFB laser diode can be operated up to 1.25Gb/s, the 1490nm receiver section incorporates an efficient InGaAs/InP PIN photodiode, the 1550nm receiver is a broadcast, low distortion photodiode. The most compacted and cost-effective WDM can be provided in a single fiber. The triplexer can be built for a wide variety of data communicate applications to implement high-speed extends up to 10Gb/s signal rates, long distance up to 20km. 9/125μm diameter single mode fiber with an optional connector.
OSM Inc. was established in 2009, it is an innovative and trusted customer-driven supplier of advanced optical communication technology solutions. OSM Inc. designs, develops and sells high performance and cost-competitive optical communication components and assemblies for Datacom, Telecom, Broadcast… [Read More]
Tel: +86-28-6457 0369
Fax: +86-28-6457 0369
E-mail: sales@osemos.com